Check category
How to start the car starter correctly

2021-12-29
1. Generally, the interval between each start is more than 3 seconds; each start time cannot exceed 10 seconds; if the start fails 3 times in a row, you need to pull out the key, rest for 1 minute and then continue to start.
If it still fails to start, you can call for rescue.
Under normal circumstances, the pressure of the automobile oil pump and internal wear will cause insufficient gasoline pressure. At this time, the fire will fail the first time, and the vehicle can only be started when the second time is fired.
1. Generally, the interval between each start is more than 3 seconds; each start time cannot exceed 10 seconds; if the start fails 3 times in a row, you need to pull out the key, rest for 1 minute and then continue to start.
If it still fails to start, you can call for rescue.
Under normal circumstances, the pressure of the automobile oil pump and internal wear will cause insufficient gasoline pressure. At this time, the fire will fail the first time, and the vehicle can only be started when the second time is fired.
What are the precursors to the occurrence of automobile generator failure

The composition and function of generator end cover

The generator end cover is generally divided into a front end cover and a rear end cover, which are cast in aluminum alloy.
The back end cover is equipped with a brush assembly, which is composed of a brush, a brush holder and a brush spring.
The composition of the generator end cover is also determined according to the engine fixed installation generator bracket adapted to the corresponding vehicle model.
The role of generator end cover
The generator end cover serves to fix the rotor, stator, rectifier and brush assembly.
The generator end cover made of aluminum alloy can effectively prevent magnetic flux leakage, and the aluminum alloy has good heat dissipation performance.
The generator end cover is generally divided into a front end cover and a rear end cover, which are cast in aluminum alloy.
The back end cover is equipped with a brush assembly, which is composed of a brush, a brush holder and a brush spring.
The composition of the generator end cover is also determined according to the engine fixed installation generator bracket adapted to the corresponding vehicle model.
The role of generator end cover
The generator end cover serves to fix the rotor, stator, rectifier and brush assembly.
The generator end cover made of aluminum alloy can effectively prevent magnetic flux leakage, and the aluminum alloy has good heat dissipation performance.
The working principle of car generator

2021-12-29
How to adjust the starter

2021-12-29
Previous page
1
2
Next page
Quick navigation
MESSAGES
底部留言
Description:
Copyright © 2022 Zhejiang Noontimes Autoparts Co., Ltd. Powered by www.300.cn seo